Blog

vertical build

Viewing posts tagged vertical build

Ryzen Build: Part 2

This was a pretty straightforward installation. I had to dismount the GPU from the case to give me access to the middle PCIe 16x slot that was behind it. Using the lowest slot wasn’t feasible, as the riser cable is quite long and I didn’t want to fold it too much.

I noticed that the initial installation of the CableMod Vertical Riser Kit has caused the expansion slots to bend outwards due to pressure from the HDMI cables; will deal with that another time. Haha.

After that I was going to put in a right angle USB3.0 adapter or two to hide the USB3.0 header that was sticking out from behind the cable bar. Somehow just decided to stuff it at the back there somewhere. Had some trouble remounting the back of the case as I was too lazy to take the PC off the shelf.

The AverMedia LiveGamer 4K solves my issue of multi-channel LPCM pass-through from my PS4 Pro to my TV, but maybe due to the length of the cables (2x 3m UGREEN HDMI 2.1 cables) or the capture device itself, the PS4 Pro is now complaining about lack of bandwidth available in the HDMI 2.0 protocol. Currently fine if I drop the number of channels down from 7.1 to 5.1, which I guess is sufficient since I have a 5.1.2 setup. Gonna try moving my PC to the other side of the TV and using shorter cables to see if it helps.

Check out Part 3: GPU Upgrade!

Consolidated build post: https://purrfectbliss.com/2020/08/28/ryzen-build-2020/ for all parts!